Looking for an alternative to the IKEA MOPPE? Here’s how to DIY one.
I have an old LACK shelving unit (not sold anymore) and no box/ drawer options really fit in it.
Then, I realised the depth of KNUFF magazine file was as wide as my LACK shelf.
Before, previously painted KNUFF magazine files
The KNUFF magazine files come in a set of 2 and are imbricated one into another. The slight variance in size made it possible to create drawers.
I decided to cut 3 unused KNUFF magazine files to create a kind of customized alternative IKEA MOPPE mini storage chest.
- 3 KNUFF magazine file set — Each set comes with 2 boxes – 1 unit slightly larger than the other
- Thin medium-density fibreboards (or re-use the cut part of KNUFF if you can cut more accurately than I did)
- Wood glue
Very modest for materials (glue, paint, potentially fibreboard pieces)
It goes quite quickly (especially if you have a sawing multi-tool), apart from waiting for glue to dry
Related: KNUFF transformable coffee table
Here’s how to make an IKEA MOPPE alternative
1. Cut the KNUFF files at the point where they stop of being straight. (For the smaller unit, see my note at Step 2.)
2. Cut one of the top /large side of the small unit.
Note: If you cut the side of the small unit carefully and close to the edge, you can reuse the piece for making the back of the drawer. If you mess up like I did, you’ll need:
a) In Step 1, cut the smaller unit a little bit lower than just below the ‘wave’.
b) Use additional material (eg. fibreboard) to cut a back for the drawer.
Real Life. Real News. Real Voices
Help us tell more of the stories that matterBecome a founding member
(See the detailed explanation of how this is done at the end of the post.)
Here’s more or less the result after all the cutting:
all parts cut
3. Cut the form in fibreboard to create the backs of the drawers (3 in my case)
4. Glue them to the back of the small units.
5. Using a hole saw, drill a hole in the faces of the drawers so you can pull them out.
If you don’t have a hole saw, you can drill two holes and link them with a nice cord knotted in the holes. (pictured below)
6. Do a bit of painting. Then, glue to fix the outer boxes (the large units) together to form the frame of a mini chest of 3 drawers.
7. Fit the small unit (drawers) into the large unit (outer frame) and you’re done. You have an alternative mini chest like the IKEA MOPPE.
I use them to store all my small office supplies.
And the chest fits well in my LACK shelving unit.
Detailed explanation of the difference when you can reuse the cut top or not.
If you can’t, in order for the small unit to slide perfectly into the large unit, you’ll have the cut it a little more below the start of wave form of the KNUFF.
~ by Jerry, Belgium
Subscribe to the newsletter news
We hate SPAM and promise to keep your email address safe